Inspection
1.

Remove the air cleaner assembly.

(Refer to Engine Mechanical System - "Air Cleaner")

2.

Remove the battery and battery tray.

(Refer to Engine Electrical System - "Battery")

3.

Disconnect the back up lamp switch connector (A).

4.

Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity.

Replacement
1.

Remove the air cleaner assembly.

(Refer to Engine Mechanical System - "Air Cleaner")

2.

Remove the battery and battery tray.

(Refer to Engine Electrical System - "Battery")

3.

Disconnect the back up lamp switch connector (A).

4.

Remove the back up lamp switch (A).

5.

Replace a new one and install the back up lamp switch.

Tightening torque:

39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

Яндекс.Метрика