Check the select cable for proper operation and for damage.

Check the shift cable for proper operation and for damage.

Check the boots for damage.

Check the boots for wear abrasion sticking, restricted movement or damage.

Remove the floor console assembly.

(Refer to Body - " Floor Console")

Remove the select cable (B) by removing the snap pin (A).

Remove the shift cable (B) after removing the clip (A).

Remove the cable socket (A) from lever assembly after pulling the cable socket clip in the direction of the arrow.

Remove the retainer (A) after loosen the nut (B).

Remove the air cleaner assembly.

(Refer to Engine Mechanical System - "Air Cleaner")

Remove the battery and battery tray.

(Refer to Engine Electrical System - "Battery")

Remove the shift & select cable.

(2)

Make unlock clip (C) and then remove the shift & select cable and the clip (C) from the bracket.

note

●

Do not reuse the clip (C).

Remove the shift cable at cabin room.

Install the control cable (B) and clip (A) on the bracket.

Install the washer (B) and pin (A).

Tighten the nut (B) after install the retainer (A).

Install the cable socket (A) on the shift lever assembly.

Install the shift cable (B) and clip (A).

Shift lever to "3rd".

Install the snap pin (A) after install the select cable (B).

Install the floor console assembly.

(Refer to Body - " Floor Console")

Install the battery and battery tray.

(Refer to Engine Electrical System - "Battery")

Install the air cleaner assembly.

(Refer to Engine Electrical System - "Battery")

Remove the select cable snap pin (A) and then remove the select cable (B) from the shift lever pin.

Shift the shift lever to 3rd gear.

Move the slide clip (B) of guide member (A) in the direction as shown in the illustration.

Install the select cable (A).

Insert the slide clip in the direction as shown in the illustration and then install the snap pin (A).