3.
Disconnect the connector from the power window switch module.
Disconnect the negative (-) battery terminal.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
Disconnect the connector from the power window switch module.
Check for continuity between the terminals in each switch position according to the table.
Disconnect the negative(-) battery terminal.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
Disconnect the power window switch module connectors (A) from the door trim.
Remove the power window switch (A) after loosening 4 screws.
Be careful not to damage door trim panel and door module mounting hooks.
Install the power window switch.
Connect the connector and install the front door trim.
