1.
Check the hands free remote control switch for resistance between terminals in each switch position.
Switch | Connector terminal | Resistance (±5%) |
Voice | 2 - 5 | 10.71 kΩ |
End of call | 2 - 5 | 18.91 kΩ |
Call | 2 - 5 | 40.91 kΩ |
Check the hands free remote control switch for resistance between terminals in each switch position.
Switch | Connector terminal | Resistance (±5%) |
Voice | 2 - 5 | 10.71 kΩ |
End of call | 2 - 5 | 18.91 kΩ |
Call | 2 - 5 | 40.91 kΩ |
Disconnect the negative (-) battery terminal.
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
Remove the steering wheel.
(Refer to Steering System - "Steering Column and Shaft")
Remove the steering wheel cover (A) after loosening the screw.
Disconnect the steering heater connectors (A).
Remove the steering remote control switch assembly after loosening the mounting screws (4EA).
Disconnect the switch connectors (A).
Remove the remote control switchs (A) after loosening the mounting screws.
Reassemble the steering wheel remote control switch after connecting the connector.
Reassemble the driver airbag module.
Make sure the audio remote control switch and the airbag module connectors are plugged in properly.
