Install the component with the specified torques.
Note that internal damage may occur when the component is dropped. In this case, use it after inspecting
Apply the engine oil to the injector O-ring.
Inspect the injector O-ring when installing.
Install in the reverse order of removal.
Delivery pipe installation bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Delivery pipe installation nut (↔ Fuel feed tube):
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
