Remove the automatic transaxle.

(Refer to Automatic Transaxle System - "Automatic Transaxle")

Remove the manual transaxle.

(Refer to Manual Transaxle System - "Manual Transaxle")

Automatic transaxle : Remove the drive plate.

(Refer to Cylinder Block – “Drive Plate”)

Manual transaxle : Remove the flywheel.

(Refer to Cylinder Block – “Flywheel”)

Remove the rear oil seal (A).

Install a new rear oil seal.

(2)

Using SST (09231-H1100, 09214-2E000) and a hammer, tap in the oil seal (A) until the SST face is aligned with the cylinder block assembly rear face.

Install the other parts reverse order of removal.