13530779

note

●

Thoroughly clean all parts to be assembled.

●

Before installing the parts, apply fresh engine oil to all sliding and rotating surface.

●

Replace oil seals with new ones.

Install the valves.

(1)

Using the SST (09222-2E000), push in a new stem seal (A).

note

●

Do not reuse old valve stem seals.

●

Incorrect installation of the seal could result in oil leakage past the valve guides.

(2)

Install the valve, valve spring and spring retainer.

note

Place the valve springs so that the side coated with enamel faces toward the valve spring retainer and then installs the retainer.

(3)

Using the SST (09222-3K000, 09222-3K100), compress the spring and install the retainer locks.

Before releasing the valve spring compressor, ensure that the retainer locks are correctly in place after pushing down and releasing the compressor handle 2 ~ 3 times.

caution

When installing the SST, insert the front support (A) directly into the bolt hole on the cylinder head.

caution

Do not press valve retainer more than 12 mm (0.47 in.).