5.
Remove the oil pressure switch (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft)
Disconnect the battery negative terminal.
Remove the engine room under cover.
Drain the engine oil.
(Refer to Lubrication System - "Engine Oil")
Disconnect the oil pressure switch connector (A).
Remove the oil pressure switch (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft)
Install in the reverse order of removal.
When installing the oil pressure switch, apply seal lock to the thread.
Seal lock : THREE BOND 2403
Thickness : 0.2 ~ 0.4 mm (0.008 ~ 0.016 in)
