6.
Disconnect the inhibitor switch connector (A).
Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.
Disconnect the negative (-) battery cable.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air cleaner")
Remove the shift cable mounting nut (B).
Disconnect the inhibitor switch connector (A).
Remove the manual control lever (B) and the washer after removing a nut (A).
Remove the inhibitor assembly (A) after removing the bolts (2ea).
When installing, tighten the inhibitor assembly mounting bolt lightly, so that necessary adjustments can be made. Tighten to specifications.
