2.
Disconnect the vacuum pump connector (A).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the vacuum pump connector (A).
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
Disconnect the vacuum hose clip (A) and wiring harness clip (B) from the vacuum pump bracket.
Remove the under covers (A).
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Remove the intercooler inlet hose (A).
Disconnect the vacuum hose (A).
Loosen the vacuum pump bracket bolts (A) and then remove vacuum pump and bracket.
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
Remove the bolts and then remove the vacuum pump (A) and lead wire assembly (B) from the bracket (C).
Tightening torque :
6.0 ~ 8.0 N.m (0.61 ~ 1.82 kgf.m, 4.4 ~ 5.9 lb-ft)
