3.
Disconnect the pretensioner connector lock pin, and remove the rear seat belt pretensioner connector (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
When installing the belt, make sure not to damage the retractor.
Remove the rear package tray trim.
(Refer to Interior Trim - "Rear Package Tray Trim")
Loosen the mounting bolt, and remove the rear seat belt pretensioner (A).
Disconnect the pretensioner connector lock pin, and remove the rear seat belt pretensioner connector (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
Install in the reverse order of removal.
Replace any damaged clips.
