PCM/ECM sets DTC P0699 if the PCM/ECM detects reference voltage higher than threshold value.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Electrical Check | 1. Short to battery in power circuit 2. Poor connection or damaged harness 3. Faulty APS1 |
Enable Conditions |
•
IG "ON" | |
Threshold Value |
•
APS1 > 5.5V | |
Diagnostic Time |
•
0.1sec. | |
MIL On Condition |
•
1 driving cycle | |
Limp-Home |
•
Forced limited power mode : The PCM/ECM limits opening angle of the throttle valve to max. 50% and engine torque to a certain pre-determined value.
•
After idle recognition, the PCM/ECM uses APS2 signal to calculate the current opening angle of the throttle valve. |