The PCM/ECM sets DTC P0315 when the number of crankshaft teeth during one revolution is incorrect or crankshaft signal is missing while camshaft signal is detected.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Monitor segment time adaptation | 1. Misadjust crankshaft and camshaft pulley position 2. Poor connection or damaged harness |
Enable Conditions |
•
Engine speed(rpm) : 1500~3500(A/T), 2500~3500(M/T)
•
No crankshaft position sensor error | |
Threshold Value |
•
Segment adaptation value exceeds threshold value | |
Diagnostic Time |
•
3 rev. | |
Mil On Condition |
•
- |
