If sensor signal input is lower than 0.25V during 3 sec, ECM sets DTC P0107.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal check, low | 1. Poor connection 2. Open or short to ground in power circuit 3. Short to ground in signal circuit 4. MAPS |
Enable Conditions |
•
Time duration for which signal voltage keeps over the threshold is higher than 3 sec. | |
Threshold Value |
•
Sensor voltage is lower than 0.254 V | |
Diagnostic Time |
•
Continuous | |
MIL ON Condition |
•
3 Drive Cycle |
