If signal input phase is abnormal, ECM sets DTC P0340.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Sensor wrong mounted (check the assembling state) | 1. Poor connection 2. Abnormal assembling state 3. CMPS |
Enable Conditions |
•
No CKP sensor error
•
Gap of CKP sensor wheel detected | |
Threshold Value |
•
Despite of incoming sensor signal, the number of cases that there is no change of sensor signal is more than 5 times | |
Diagnostic Time |
•
Continuous | |
MIL ON Condition |
•
2 driving cycle |
