DTC Description

ECM sets DTC P0704 in case that the gear shifting signal is inputted more than 10 times but clutch signal is less than 2 times while vehicle is driving higher than 15km/h. The idle stop does not perform if P0704 is set.

DTC Detecting Condition

Item

Detecting Condition

Possible Cause

DTC Strategy

Signal check

1.

Poor connection

2.

Clutch Switch

3.

Abnormal Clutch Switch installation

Enable Conditions

Vehicle speed is lower than 15 kph

Brake switch signal OFF

Counter of gear shift detection is higher than 10 times

Threshold Value

Number of clutch switch activation is lower than 2times

Diagnostic Time

-

MIL ON Condition

NO MIL

Яндекс.Метрика