7073874

Component Inspection

1.

IG "OFF" & Disconnect Injector connector.

2.

Measure resitance between terminal 1 and 2 of Injector connector.(Component Side)

Specification :

Item	Specification
Coil Resistance(Ω)	13.8 ~ 15.2 [20 ℃ 68 ℉]

3.

Is the measured resistance within specification ?

	▶ Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage. So, check poor connections and the related circuit between ECM and component thoroughly. Repair as necessary and go to "Verification of Vehicle Repair" procedure.
	▶ Substitute with a known - good Injector and check for proper operation. If the problem is corrected, replace Injector and go to "Verification of Vehicle Repair" procedure.