If there is a delay between the target angle and the real angle over 10 times, ECM sets DTC P0014.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Slow response check | 1. Poor connection 2. Contamination of Oil / Clog of Oil path 3. OCV(Exhaust) 4. CVVT |
Enable Conditions |
•
Coolant temperature is higher than -5℃
•
Time after engine start is higher than 3.5s | |
Threshold Value |
•
Counter of delayed following target valve timing is higher than 10 times | |
Diagnostic Time |
•
- | |
MIL ON Condition |
•
2 Drive Cycle |
