If the measured temperature is higher than the maximum threshold value, the ECM sets DTC P0112.(In this case, the input signal voltage is the minimum threshold vaue.)
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal check, low | 1. Poor connection 2. Short to ground in signal circuit 3. IATS |
Enable Conditions |
•
- | |
Threshold Value |
•
Voltage < 0.131 V(> 125 ℃/257 °F) | |
Diagnostic Time |
•
Continuous | |
MIL ON Condition |
•
2 driving cycles |
