This DTC sets when the crankshaft position sensor profile ignition pickup pulse is missing for greater than a calibrated number of camshaft revolutions when the camshaft speed exceeds the equivalent speed of engine idle or the starter motor is engaged.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
CKP signal = 0 while camshaft rotation detected | 1. Poor connection 2. Open or short in signal circuit 3. CKPS |
Enable Conditions |
•
- | |
Threshold Value |
•
Counter of camshaft rotation without crankshaft signal > 6 times | |
Diagnostic Time |
•
Continuous | |
MIL ON Condition |
•
2 driving cycles |
