This DTC sets when the PCM can no longer detect the signal from the camshaft position sensor(Exhaust).
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
CMP signal=1 and no tooth detected(CMP High-Exhaust) or CMP signal=0 and no tooth detected(CMP Low-Exhaust) | 1. Poor connection 2. Abnormal assembling state 3. CMPS 4. CMPS incorrectly installed 5. Damaged CMPS shielding 6. CMP circuit shorted to other CMP circuits |
Enable Conditions |
•
No CKP sensor error
•
Gap of CKP sensor wheel detected | |
Threshold Value |
•
No signal per crankshaft rev. > 4 times | |
Diagnostic Time |
•
Continuous | |
MIL ON Condition |
•
2 driving cycles |
