If the sensor input signal is higher than 4.85V, the ECM sets DTC P0193.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
High pressure sensor output voltage too high | 1. Poor connection 2. Open or short to power in signal circuit 3. FPS |
Enable Conditions |
•
IG ON | |
Threshold Value |
•
Sensor output voltage > 4.85 V(21.8 Mpa/218 bar/3161.82psi) | |
Diagnostic Time |
•
Continuous | |
MIL ON Condition |
•
2 driving cycles |
