3.
Is the measured resistence within specification?
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
 | ▶ Repair or replace as necessary and then, go to "Verification of Vehicle Repair" procedue. |
IG "OFF" and disconnect the clutch switch connector.
Measure resistence between 1 teminal and 2 terminal when clutch switch is ON or OFF.
Specification : Below 1 Ω(ON) and ∞(OFF)
Is the measured resistence within specification?
| ▶ Go to "Verification of Vehicle Repair" procedure. |
| ▶ Repair or replace as necessary and then, go to "Verification of Vehicle Repair" procedue. |
