Component Inspection
■ Inspection Fuel Pump Relay
1.

Connect GDS to Data Link Connector(DLC).

2.

IG KEY "ON" & ENG "OFF".

3.

Perform "Actuation Test" for Fuel Pump.

■ Confirm Part Inspection
4.

Does the Fuel Pump operate properly? (Check variation)

▶ Go to "Verification of Vehicle Repair" procedure.

▶ Substitute with a known-good Fuel Pump Relay and check for proper operation. If the problem is corrected, replace Fuel Pump Relay and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика