7085583

1.

Ignition "ON" & Engine "OFF" and Using a GDS, clear the DTC.

2.

Ignition "OFF".

3.

Disconnect the battery (-) terminal cable from the battery, and wait at least one minutes.

4.

Disconnect DSIS connector .

5.

Substitute the DSIS and check for proper operation.

6.

Is "Diagnostic Trouble Codes(DTC)" present problem ?

▶ Substitute a known-good SRSCM, and check for proper operation.

If the problem is corrected, replace SRSCM and then go to "Verification of Vehicle Repair" procedure.

▶ Substitute the SRSCM and check for proper operation.

If the problem is corrected, replace SRSCM and then go to "Verification of Vehicle Repair" procedure.

▶ Substitute a known-good DSIS, and check for proper operation.

If the problem is corrected, replace DSIS and then go to "Verification of Vehicle Repair" procedure.