3.
Warm up the engine to normal operating temperature.
Specification : Refer to Signal Waveform & Data
IG KEY "OFF".
Connnect CH A probe to LIN signal terminal of battery sensor connector.
Warm up the engine to normal operating temperature.
Specification : Refer to Signal Waveform & Data
Does the battery sensor operate properly? (Check variation)
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
 | ▶ Substitute with a known-good battery sensor and check for proper operation. If the problem is corrected, replace battery sensor and then go to "Verification of Vehicle Repair" procedure. |
