This DTC B100352 is set when variant coding is incorrectly performed as if ABS option is installed on the vehicle even though real vehicle has not ABS on the CAN BUS.
Item | Conditions for setting DTC | Possible Cause | |
DTC Strategy |
•
Check CAN communication | 1. Check option information and performance of cluster 2. Perform culster coding procedure 3. Check ABS ECU 4. Check CAN line 5. Check Cluster | |
Enable Conditions |
•
IG key "ON" | ||
Case1 | ThresholdValue |
•
ABS scan error | |
DTC ErasingTime |
•
In case of correctly performed coding procedure | ||
Case2 | ThresholdValue |
•
End of line has ABS option information even though ABS has not been detected on the CAN BUS | |
DTC ErasingTime |
•
Erased DTC after solved problem | ||
Diagnostic Time |
•
500㎳ | ||
