This code reports an error in LIN line. The purpose is to verify the status of BCM(PAS), Sensor and Wire when error is detected at PAS of Rear Center Left Sensor.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal output of Rear Center Left Sensor and LIN line checking | 1. TX line of Rear Center Left Sensor open or poor connection. 2. Ground line of Rear Center Left Sensor open or poor connection. 3. Power line of Rear Center Left Sensor open or poor connection. 4. Replace a sensor after checking a wire of Rear Center Left Sensor. |
Enable Conditions |
•
IG KEY ON, Shift lever R | |
Threshold Value |
•
Rear Center Left Sensor fault
•
LIN communnication fault
•
Poor connection
•
LIN line open | |
Diagnostic Time |
•
Immediately | |
DTC Erasing Time |
•
DTC is erased immediately after trouble fixed |
