Monitor GDS Data
1.

Ignition "ON" & Engine "OFF"

2.

Connect GDS and clear the “Diagnostic Trouble Codes(DTC)”.

3.

Is DTC P1688 displayed again?

▶ While IGN1 On, when incorrect PIN is entered for more than 3 times, wait 1 hour to for next attempt.When PIN or Password lock is released, check the stored PIN or Password on the IMMO first, then perform verification of vehicle repair.

▶ Fault is intermittent caused by poor contact in ICU’s and/or PCM/ECM connector or was repaired and ICU’s and/or PCM/ECM memory was not cleared. Therefore, Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика