2.
After connecting GDS, Monitor the “Current Data” to check key status.
Ignition "ON" & Engine "OFF"
After connecting GDS, Monitor the “Current Data” to check key status.
Is the current data OK?
 | ▶ Fault is intermittent caused by poor contact in ICU and Antenna coil or was repaired and ECM memory was not cleared. Therefore Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure. |
 | ▶ Go to "Component Inspection" procedure. |
