3.
Perform "Actuation Test" for PCSV.
Connect GDS to Data Link Connector(DLC).
IG KEY "ON" & ENG "OFF".
Perform "Actuation Test" for PCSV.
IG Key "OFF"
Disconnect PCSV connector.
Measure resistance between power and control terminal of the PCSV. (Component Side)
Specification : Approx. 24 ± 2 [20°C(68 °F)]
Does the PCSV operate properly? (Check variation)
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
 | ▶ Substitute with a known-good PCSV and check for proper operation. If the problem is corrected, replace PCSV and then go to "Verification of Vehicle Repair" procedure. |
