1.
Disconnect the hood latch connector (A).
Disconnect the hood latch connector (A).
Remove the hood latch assembly (A) mounting bolts.
Tightening torque :
7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7 lb-ft)
Disconnect the hood latch release handle cable (B) and remove the hood latch assembly (A).
Install in the reverse order of removal.
Make sure the hood latch release cable is connected properly.
Make sure the hood locks/unlocks and opens/closes properly.
Adjust the latch alignment.
