3.
After loosening the mounting clips and screw, then remove the luggage side trim (A).
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Remove the rear wheel house trim.
(Refer to Interior Trim - "Rear Wheel House Trim")
Remove the rear transverse trim.
(Refer to Interior Trim - "Rear Transverse Trim")
After loosening the mounting clips and screw, then remove the luggage side trim (A).
Disconnect the luggage lamp connector (A).
Install in the reverse order of removal.
Make sure the connector is plugged in properly.
Replace any damaged clips.
