3.
Remove the rear oil seal (A).
Remove the transaxle assembly.
(Refer to Manual Transaxle System - "Manual Transaxle")
(Refer to Automatic Transaxle System - "Automatic Transaxle")
MT : Remove the flywheel.
(Refet to Cylinder Block - "Flywheel")
AT : Remove the drive plate.
(Refet to Cylinder Block - "Drive Plate")
Remove the rear oil seal (A).
Install a new rear oil seal.
Apply engine oil to a new oil seal lip.
Using the SST(09231-H1100, 09231-2B200) and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.
Install the other parts in the reverse order of removal.
