1.
Disconnect the power door mirror switch module connector from front door trip panel.
Disconnect the power door mirror switch module connector from front door trip panel.
Check for the continuity between terminals of power door mirror switch according to the table.
Disconnect the negative(-) battery terminal.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
Disconnect the power window switch connectors (A).
Remove the power window switch (A) after loosening 4 screws.
Remove the power door mirror switch (A) after loosening a screw.
Be careful not to damage the hook when removing the switch module.
Install the driver power window switch and connectors.
Install the front door trim.
