1.
Remove the fuel filler neck assembly after unscrewing the mounting bolts (A).
Remove the fuel filler neck assembly after unscrewing the mounting bolts (A).
Lift the vehicle.
Remove the left - rear wheel ＆ tire and the wheel house.
Disconnect the fuel filler hose (A), the leveling hose (B) and the ventilation hose (C).
Remove the filler-neck assembly from the vehicle after removing the bracket installation bolt (A).
Install in the reverse order of removal.
Filler-neck assembly installation screw:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Filler-neck assembly bracket installation bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
