The clutch switch is used for the Hill start Assist Control function.
lf the wrong reverse gear signal has been set for a certain period of time, a failure is recognized.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
Voltage Monitoring |
•
Open or short Gear R switch(Transaxle range switch, Back Up Lamp Switch)
•
Faulty Gear R switch(Transaxle range switch, Back Up Lamp Switch) |
Monitoring Period |
•
Continuous | |
Enable Conditions |
•
A reverse gear reverse fault is detected if for at least 20s with high vehicle speed (>20m/s) the reverse gear switch has been set continuously. | |
Fail-Safe |
•
Inhibit the HAC control and allow the ABS/EBD/ESP control.
•
The ESP warning lamps are activated. |
