EPS provides different assist force according to vehicle speed while engine ON. A vehicle speed signal must be inputted normally to EPS CM for normal EPS control.
EPS CM sets this code if EPS CM doesn't receives a vehicle speed signal from EMS normally.
At that time it controls EPS system by using predefined vehicle speed value.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
Check received message from ECM |
•
Faulty ECM |
Enable conditions |
•
IG ON | |
Threshold value |
•
Vehicle speed signal is INVALID | |
Fail Safe |
•
EPS CM sets vehicle speed as 80kph (50mile). | |
Restoration conditions |
•
Received vehcle speed signal from ECM is normal. |
