3.
Remove the accelerator pedal assembly from the vehicle after unscrewing the mounting nut (B).
[LHD]
[RHD]
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the accelerator pedal position sensor connector (A).
Remove the accelerator pedal assembly from the vehicle after unscrewing the mounting nut (B).
[LHD]
[RHD]
Installation is reverse of removal.
Fuel pump installation nuts:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
