3.
Disconnect the stop lamp switch connector (A).
Remove the crash pad lower panel. (Refer to the Body group- crash pad).
Pull down steering column shaft after removing bolts and nuts. (Refer to the Steering group- steering column and shaft)
Disconnect the stop lamp switch connector (A).
Remove the shift lock cable after removing the snap pin (A) and the clip (B).
Remove the snap pin (A) and clevis pin (B).
Remove the mounting bracket bolts (B).
Tightening torque :
18.6 ~ 23.5 Nm (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)
Remove the brake pedal member assembly mounting nuts and then remove the brake pedal assembly.
Tightening torque :
12.7 ~15.7 Nm (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)
