Troubleshooting for Speaker
Basic inspection of speaker
Inspect the sound from speaker after verifying that the speaker mounting screws is removed and the wiring connector is connected precisely to remove vibration transmitted from body trims and surrounding parts.
Case Troubleshooting
No. | Case | Inspection/Remedy |
1 | Trembling sound | 1. Before replacing the speaker, inspect that the mounting screw is installed normally. 2. After re-installing the speaker, verify that no trembling sound is heard. 3. When hearing a trembling sound again, replace the speaker with new one. |
2 | Noise | 1. Check if the wiring connector is connected normally. If not, reconnect the wiring connector. 2. In case of radio static, check if there is a noise from CD player. 3. When a noise is heard on turning radio and CD on, replace the speaker with new one. note In case there is only radio static, this causes from poor radio reception. Thus the speaker needs no repair and replacement. |
3 | Poor working | Inspection of the wiring connection between the battery and the speaker 1. Before replacing the speaker, inspect the wiring connection between the battery and the speaker is normal. 2. Check the supplying power to the speaker and the resistance, and then inspect the sound quality.  3. If the speaker works poorly, replace it with new one. |
During handling of speaker.
Do not damage the speaker with impact as like a drop and a throw.
Be careful not to cover water and oil over the speaker.
Caution during handling of speaker the material of diaphragm is paper which can easity to be torn by impact made out of and external force.
When modifying audio system can electrically damage the speaker.
If modified, the speakers are not covered by the manufacturer's warranty.
