1.
Remove the flexible hose (A) connected to brake reserve tank from the master cylinder.
[LHD]
note
In advance remove the ECU and battery.
Put aside the fuel pump by disconnecting the connectors and remove the mounting nuts.
[RHD]
Remove the flexible hose (A) connected to brake reserve tank from the master cylinder.
[LHD]
In advance remove the ECU and battery.
Put aside the fuel pump by disconnecting the connectors and remove the mounting nuts.
[RHD]
Disconnect the clutch tube (B) from the master cylinder.
Remove the clutch pedal mounting nuts (A-2ea).
Disconnect the push rod from the master cylinder by removing the snap pin (A) and washer (B).
