1.
Apply the specified grease to the clutch pedal and bushings.
Chassis grease : SAE J310a, NLGI No.1
Apply the specified grease to the clutch pedal and bushings.
Chassis grease : SAE J310a, NLGI No.1
Apply the specified grease to the snap pin and washer.
Wheel bearing grease : SAE J310, NLGI No.2
Install the clutch pedal mounting nuts (A-2ea).
Tightening torque
9.8 ~ 14.7N.m (1.0 ~ 1.5kgf.m, 5.8 ~ 10.8Ib-ft)
Connect the push rod to the clutch pedal by installing the snap pin (A) and washer (B).
Install the clutch pedal bracket bolt to the body.
