2.
Install the retainer (A) and nuts (B).
Tightening torque :
11.8~14.7 N.m (1.2~1.5 kgf.m, 8.7~10.8 lb-ft)
Install the cable assembly placing the select and shift lever in neutral position. (Refer to Transaxle installation).
Install the retainer (A) and nuts (B).
Tightening torque :
11.8~14.7 N.m (1.2~1.5 kgf.m, 8.7~10.8 lb-ft)
Install the shift lever assembly by installing the bolts (4ea).
Tightening torque :
8.8~13.7 N.m (0.9~1.4 kgf.m, 6.5~10.1 lb-ft)
Install the cable with the clip to the shift lever.
Move the slide clip (A) in the direction as shown in the illustration in order to adjust the slide clip fit into the select lever.
Install the snap pin (A) to hold the select cable assembly.
Install the center console. [Refer to "Interior(Console)" in BD group)
Install the shift lever knob (A) and upper cover (B). [Refer to "Interior(Console)" in BD group)
