1.
Check for continuity between the tailgate outside handle terminals.
Refer to the BE group - inspection / self diagnosis with GDS.
Refer to the BE group - inspection / self diagnosis with GDS.
Refer to the BE group - inspection / self diagnosis with GDS.
Check for continuity between the tailgate outside handle terminals.
If continuity is not specified, inspect the switch.
Take care not to scratch the crash pad and related parts.
Disconnect the negative(-) battery terminal.
Remove the brake pedal assembly.
(Refer to the BR group - "Brake system")
Loosen the nuts (2EA) from the smart key unit (A) after disconnecting the connector.
Take care not to scratch the crash pad and related parts.
Disconnect the negative(-) battery terminal.
Remove the glove box.
(Refer to the BD group - "Crash pad")
After loosening the mounting nut, disconnect the connector and remove the receiver (A).
Disconnect the negative(-) battery terminal.
Remove the console extension cover (A).
After loosening the antenna nuts (2EA) and connector, remove the interior 1 antenna (A).
Disconnect the negative(-) battery terminal.
Remove the rear seat.
(Refer to the BD group - "Seat")
Open the fuel pump mat (A).
Remove the interior 2 antenna (A) after loosening nut (2EA) and connector.
Disconnect the negative(-) battery terminal.
Remove the scuff trim.
(Refer to the BD group - "Interior trim")
After loosening the antenna nuts (2EA) and connector (A), remove the tailgate antenna (B).
Disconnect the negative(-) battery terminal.
Remove the rear bumper.
(Refer to the BD group - "Rear bumper")
Disconnect the antenna connector (A) and remove the exterior bumper antenna (B) after loosening the nuts(2EA).
Disconnect the negative(-) battery terminal.
Remove the air cleaner assembly.
(Refer to the EM group - "Intake Manifold")
Remove the external buzzer (A) after looseing the bolt.
Disconnect the negative (-) battery terminal.
After loosening the mounting bolt, then remove the key holder (A).
Remove the outside handle (A) by sliding it rearward.
Disconnect the connector after removing the door trim.
Disconnected negative(-) battery terminal.
Remove the tailgate trim.
(Refer to the BD group - "Tailgate trim")
Remove the tailgate garnish.
(Refer to the BD group - "Tailgate trim")
Remove the outside handle (A) from the tailgate garnish after loosening the outside handle mounting screws (2EA).
Install the smart key unit.
Install the smart key unit mounting nuts and connector.
Install the brake pedal assembly.
Install the negative (-) battery terminal and check the smart key system.
Install the RF receiver.
Install the glove box housing.
Install the glove box.
Install the negative (-) battery terminal and check the smart key system.
Install the interior 1 antenna.
Install the console extension cover.
Install the negative (-) battery terminal and check the smart key system.
Install the interior 2 antenna.
Install the rear seat.
Install the negative (-) battery terminal and check the smart key system.
Install the tailgate antenna.
Install the scuff trim.
Install the negative (-) battery terminal and check the smart key system.
Install the exterior bumper antenna.
Install the rear bumper.
Install the negative (-) battery terminal and check the smart key system.
Install the buzzer.
Install the air cleaner assembly.
Install the negative (-) battery terminal and check the smart key system.
Install the outside handle.
Install the door trim.
Install the negative (-) battery terminal and check the smart key system.
Install the tailgate outside handle.
Install the tailgate garnish.
Install the tailgate trim.
Install the negative (-) battery terminal and check the smart key system.
