3.
Install the seat belt pretensioner with a bolts (A, B).
Tightening torque:
Bolt B: 39.2 ~ 53.9 Nm (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb.ft)
Remove the ignition key from the vehicle.
Disconnect the battery negative cable and wait for at least three minutes.
Install the seat belt pretensioner with a bolts (A, B).
Tightening torque:
Bolt B: 39.2 ~ 53.9 Nm (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb.ft)
Connect the seat belt pretensioner connector (C).
Install the upper anchor bolt.
Tightening torque
: 39.2 ~ 53.9 Nm (4.0 ~ 5.5 kgf.m, 28.9 ~39.8 lb.ft)
Install the following parts. (Refer to the Body group- Interior trim)
Center pillar trim
Door scuff trim
Install the lower anchor bolt.
Tightening torque
: 39.2 ~ 53.9 Nm (4.0 ~ 5.5 kgf.m, 28.9 ~39.8 lb.ft)
Reconnect the battery negative cable.
After installing the seat belt pretensioner, confirm proper system operation:
Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.23
