8843008

1.

IG "ON".

2.

Connect GDS to Data Link Connector(DLC).

3.

Start and drive vehicle in gear and maintain vehicle speed at or above 12km/h. (7.5mph)

4.

Monitor the "WHEEL SPEED SNSOR-RL" parameter on the GDS.

5.

Is parameter displayed within specifications?

	▶ Fault is intermittent caused by faulty HECU or external noise, was repaired and HECU memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.
	▶ Go to "Component Inspection" Procedure.