2.
Manually operate the control switch and measure the voltage of blower motor between pin 1 and 2.
Specification
Fan | Voltage (V) |
1 | Auto Lo (4.0) |
2 | 4.1~5.2 |
3 | 5.3~6.4 |
4 | 6.5~7.6 |
5 | 7.7~8.8 |
6 | 8.9~10.1 |
7 | 10.2~Auto Hi (11.3) |
8 | Battery |
Ignition "ON"
Manually operate the control switch and measure the voltage of blower motor between pin 1 and 2.
Fan | Voltage (V) |
1 | Auto Lo (4.0) |
2 | 4.1~5.2 |
3 | 5.3~6.4 |
4 | 6.5~7.6 |
5 | 7.7~8.8 |
6 | 8.9~10.1 |
7 | 10.2~Auto Hi (11.3) |
8 | Battery |
Disconnect the negative (-) battery terminal.
Remove the left side cover (A).
Remove the left extension cover (A).
Remove the crashpad lower cover (A).
Remove the crash pad side switch assembly (A).
Remove the crashpad lower panel (A).
Remove the left shower duct (A).
Remove the brake pedal.
(Refer to BR group - "Brake Pedal")
Disconnect the connector (A) of the power mosfet.
Remove the power mosfet (B) after loosening the mounting screws.
Installation is the reverse order of removal.
