1.
Disconnect the oxygen sensor connector (A) and then remove the front muffler (B).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
Disconnect the oxygen sensor connector (A) and then remove the front muffler (B).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
Remove the catalytic converter (A) and the center muffler (B).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
When installing the clamp in between the center pipe and main muffler pipe ;
Align the marks on the center pipe and main muffler pipe as shown illustration.
The clamp installing position (A) must be upper than the line virtually made by the two marks.
Tightening torque:
Clamp: 16.7 ~ 26.5 N.m (1.7 ~ 2.7 kgf.m, 12.3 ~ 19.5 lb-ft)
Do not reuse the clamp.
Remove the main muffler (A).
Tightening torque:
16.7 ~ 26.5 N.m (1.7 ~ 2.7 kgf.m, 12.3 ~ 19.5 lb-ft)
