1.
Disconnect the fuel filler hose (A) and the leveling hose (B), and then disconnect the vapor hose (C).
Disconnect the fuel filler hose (A) and the leveling hose (B), and then disconnect the vapor hose (C).
Open the fuel filler door.
Remove the filler-neck mounting screws (A).
Remove the rear-LH wheel and tire.
Remove the bracket mounting bolt (A) and remove the filler-neck assembly.
Installation is reverse of removal.
Filler-neck assembly bracket installation bolt:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Filler-neck assembly installation screw:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
